| |
  |
 |
|
Joint Hole Detector controller is using to sense the holes vicinity of welded parts of coils in continuous process. |
 |
MODEL |
|
PRJD-55 |
|
DETECTION HEIGHT |
|
1000mm |
|
DETECTION DISTANCE |
|
450 mm |
|
|
DIA OF HOLE |
|
12mm ~ 35mm |
|
|
LIGHT ELEMENT |
|
LED OF INFRARED RAY |
|
|
RECEIVINHG ELEMENT |
|
INFRARED RAY DIODE |
|
|
TEMPERATURE |
|
-10℃ ~ +50℃ |
| |
|
|
|
| |
|
MODEL |
|
PJDC-308D |
|
INPUT POWER |
|
220V ONLY |
|
OUTPUT |
|
NO VOLTAGE CONTACT POINT | | | |
|
|
| |
|
|
|
|
Stagger function
- When the both edges of strip become thicker
because of continuous coating or painting.
this item makes strips rewound as zigzag pattern. |
|
MODEL |
|
Stagger Guide (PR-ST-100) |
|
MOTOR |
|
PK266M-01A (0.9˚/step) |
|
LIMIT |
|
± 0.1mm |
|
INFUT POWER |
|
DC 24V - 2A |
|
WEIGHT |
|
15 kg |
|
COLOR |
|
BLACK (LUSTERLESS) | | |
 |
|
|
stagger function controller |
|
MODEL |
|
PR-ST-370 |
|
INPUT POWER |
|
AC110V/220V |
|
WEIGHT |
|
7kg | | | | |
|
|
| |
|
|
|
|
Position transmitter is including a high precision potentiometer so, it is using to control center by changing resistance value proportional to the varying linear position of strips at any position.
And, it send a position of cylinder to an analog value. |
|
MODEL |
|
PR-CPM |
|
DETECTION DISTANCE |
|
270mm, 540mm, 945mm |
|
ALLOWABLE POWER |
|
3.3W |
|
|
OUTPUT |
|
0~2kΩ |
|
|
WEIGHT |
|
3.2kg |
| |
|
|
|
|
| | | |
 |
|
 |
How to set |
| |
- After attach cylinder tube using stationary bracket, fix loop of the wire to wall of winder or end of cylinder rod.
Place winder desired center position manually.
- Dissemble the cap of potentiometer, then loose 2 pieces of stop bolts on shaft of wire drum.
Adjust zero as turning control knob till resistant value of 2and 1 pins of 4p connector is 1KΩ.
After adjust zero, tighten stop bolts of shaft on wire drum. |
| |
| |
 |
| Guide Roller (Motor Type) | |
 | |
| |
 |
|
|
This Guide Roller is using to lead web to place on exact printing or cutting points as working.(End pivot type) |
|
MODEL |
|
PR-MGR-S30 |
|
AMX. COMTROL ANGLE |
|
±5.2 |
|
LIMIT |
|
0.1mm |
|
WEIGHT |
|
15 Kg (ROLLER EXCLUDED) | | | | |
| Guide Roller (Cylinder Type) | |
| |
| |
|
|
|
|
This Guide Roller is using to lead web to place exact printing or cutting points as working.(End pivot type) |
|
MODEL |
|
PRGR-S30 |
|
|
MAX CONTROL ANGLE |
|
±5.2 |
|
|
LIMIT |
|
0.1mm |
|
|
WEIGHT |
|
15 Kg (ROLLER EXCLUDED) |
|
|
|
|
|
|
ROLLER Dimensions should be more than 120% of maximum length of web | | | |
|
|
|
|
|
|
This Guide Roller is using to lead web to place before the exact printing or cutting points as working.(End pivot type) |
|
MODEL |
|
PRGR-D25, D30 |
|
|
MAX CONTROL ANGLE |
|
±5.2 |
|
|
ERROR |
|
0.1mm |
|
|
PRGR-D25 WEIGHT |
|
17 KG (ROLLER EXCLUDED) |
|
|
PRGR-D30 WEIGHT |
|
19 Kg (ROLLER EXCLUDED) |
|
|
|
|
|
|
ROLLER Dimensions should be more than 120% of maximum length of web. | | |
|
|
| |
  |
|
|
This Guide Roller is using to lead web to place before the exact printing or cutting points as working.(Center type)
* It will be efficient to use roller made of aluminum.
* Use roller made for guide only. |
|
MODEL |
|
PR-CGD-800 ~ 1400 |
PR-CGD-1600~1800 |
|
|
MAX. TENSION |
|
100 kgf |
100 kgf |
|
|
CORRECTION ANGLE |
|
± 3.5˚ |
± 3.5˚ |
|
|
CORRECTION DISTANCE |
|
30 mm |
30 mm |
|
|
DIA. OF ROLLER |
|
Φ100 ~ Φ160 |
Φ100 ~ Φ160 |
|
|
DISTANCE OF ROLLER |
|
800 ~ 1400 mm |
1400 ~ 1800 mm |
|
|
|
|
|
|
* It can be changed specification and size for improvement of products without notice. | | | |
|
|
|
|
|
| |
 |
|
|
Low pressure cylinder / CA1CDH |
|
MODEL |
|
CA1CDH-40, 50, 63 |
|
|
MAX PRESSURE |
|
15kgf/cm² |
|
|
LOW PRESSURE |
|
0.5kgf/cm² |
|
|
STANDARD OIL |
|
HYD. PREATING OIL |
|
|
TEMPERATURE |
|
0℃ ~ +50℃ | | | | | | | | | | | |
