น่ำแซออนไลน์

Three Conductors model 330

฿0.00
Three Conductors, 30 amps.
Disconnects included (6 lg.).
Boot Kit available.
Available with stainless steel ball bearing (330-SS).
  • หมวดหมู่ : Mercotac
  • รหัสสินค้า : 000273

รายละเอียดสินค้า Three Conductors model 330

Model 330
Three Conductors,
30 amps


 


Disconnects included (6 lg.)
Boot Kit
available
Available with stainless steel ball bearing (330-SS)
 
Model No. Terminals Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
 Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
330 3 0-250 30 100

<1m

1200 140 (60) /-20(-29) 300

>25M

330-SS 3 0-250 30 100

<1m

1200 140 (60) /-20(-29) 300

>25M

"SS" designator indicates stainless steel ball bearing  (recommended for wet or corrosive environments)



Model 330 Accessories
55251
Terminal 16 - 14 AWG
(qty. 3 included)
57430
Boot Kit
for dust or splash protection
IP51
55253
Shrink Tube (qty. 3 included)
55252
Terminal 16 - 14 AWG (qty. 3 included)
 

Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)

 

Model 330 Standard Wire Connections

Model 330 Wire Connections With Optional Boot Kit

Model 330 Suggested Mounting Methods
Model 330 is typically mounted by either the black body or the white plastic bushing on either end using a set screw.  When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH
330 et al 1.248"    (31.70) .80"    (20)
     

Typical Bushing Mount Hole Dimensions

330 et al .625"    (15.88) .40"    (10)
*Inch (mm) Tolerance Ø    +.001" (+.025)    
     -.000" (-.000)    










Installation Notes:
  • the up arrow should not point below horizontal
  • do not solder to or bend connector tabs
  • avoid lateral forces and mechanical loads (overly stiff or tight wires)
  • do not rigid mount both ends of connector
  • limit mounting eccentricity (runout / wobble) to .005" (.13mm)
  • provide overload protection within the circuit
  • avoid vibration and bumping motions