Use to change operation frequency
Use for drive operation
A reset key when the stop key is fault during drive operation
Use between group shifts or parameter setting.
This key moves to the left the digit position
Use parameter set value change and save
Use for code shifts and parameter set value increase
Use for code shifts and parameter set value decrease
The operation became easy by adopting the 6 keys and volume resistor types
on the loader. Besides, convenience is guaranteed by limiting the total
number of parameters as 100 parameters.
Light on in editing mode
Light on in drive operation
Light on in forward operation
Light on in reverse operation
68mm
85mm
128mm
Our iE5 realizes 5% smaller micro size comparing to previous product.
iE5 provides both PNP and NPN
minor signal powers so that no
matter what signal type the external
controller adopts, +24V power can
be applied.
●
●
●
●
● ●
●
●
● ●
15%
Smaller micro size Easy operation and control PI Control
PNP, NPN dual control Signal
04_ LS Industrial Systems Co., Ltd.
●
Inverter Starvert iE5 Series _ 05
*For 400W model
SV002 iE5-1
60Hz
PI Control
V/F Control
Copy Copy
The optioanl modbus communication
enables controlling drives through
PLC and other controlling devices.
Modbus-RTU
Our iE5 is best fit for small machineries
such as packing machines, small conveyers, treadmills and etc...
Small but variety!
The PI Control is used to control the
oil level, temperature and pressure
of plant and process.This drive
speed control fucntion compares
between drive setting value and
signal values guaged from sensors
and actual contol is made through
Proportion and Integral.
Modbus communication interface ((ooppttiioonnaall))
Parameter copy function (Under development)
The parameters inputed to a drive
can be duplicated and copied to other
drives by this parameter copy unit.